Replacing the rear window wiper blade
Removing the wiper blade
- Remove the SmartKey from the ignition lock.
- Fold wiper arm 1 away from the rear window until it engages.
- Position wiper blade 2 at a right angle to wiper arm 1.
- Hold wiper arm 1 and press wiper blade 2 in the direction of the arrow until it releases.
- Remove wiper blade 2.
Installing the wiper blade
- Place new wiper blade 2 onto wiper arm 1.
- Hold wiper arm 1 and press wiper blade 2 in the opposite direction to the arrow until it engages.
- Make sure that wiper blade 2 is seated correctly.
- Position wiper blade 2 parallel to wiper arm 1.
- Fold wiper arm 1 back onto the rear window.
See also:
Transmission positions
Park position
Do not shift the transmission into position P() unless the vehicle
is stationary. The parking lock should not be used as a brake when parking. In addition
to engaging the parking lo ...
Closing
WARNING
Monitor the closing procedure carefully to
make sure no one is in danger of being
injured. To prevent possible personal injury,
always keep hands and fingers away from the
cargo comp ...
Problems with PARKTRONIC
Problem
Possible causes/consequences and
Solutions
Only the red segments in the PARKTRONIC warning displays
are lit.
You also hear a warning tone for approximately two ...