License plate lamps - Changing the rear bulbs - Replacing bulbs - Lights and windshield wipers - Mercedes-Benz GLK Owners Manual - Mercedes-Benz GLK-Class | Mersag.com

License plate lamps

Mercedes-Benz GLK-Class / Mercedes-Benz GLK Owners Manual / Lights and windshield wipers / Replacing bulbs / Changing the rear bulbs / License plate lamps

Switch off the lights.
Open the tailgate.
Press lug 2 of license plate lamp 1 in the direction of the arrow and remove license plate lamp lens 1.
Remove license plate lamp lens 1.
Replace the bulb.
Insert license plate lamp lens 1 and press it in until it engages.

See also:

Engine
Display messages (USA only) (Canada only) The yellow Check Engine warning lamp lights up while the ignition is switched on with the engine running. Possible causes/consequences and ► ...

Starting procedure with the SmartKey
To start the engine using the SmartKey instead of KEYLESS-GO, pull the Start/ Stop button out of the ignition lock. •► To start a gasoline engine: turn the SmartKey to position 3 in ...

Determining the correct load limit
Step-by-step instructions The following steps have been developed as required of all manufacturers under Title 49, Code of U.S. Federal Regulations, Part 575 pursuant to the "National Traf ...