Removing/attaching the washer fluid reservoir
You must remove the washer fluid reservoir from the engine compartment before you can replace the bulbs in the left-hand headlamp.
- To detach: turn catch 2 counterclockwise.
- Swing washer fluid reservoir 1 far enough to the side to allow the bulbs of the headlamp to be replaced.
- To attach: swing back washer fluid reservoir 1.
- Turn catch 2 clockwise.
See also:
Tire pressure monitor warning messages
If the tire pressure monitor detects a
significant pressure loss on one or more tires,
a warning message is shown in the
multifunction display. A warning tone also
sounds and the tire pressure ...
Adjusting the seats
1 Head restraint height
2 Seat height
3 Seat cushion angle
4 Seat cushion length
5 Seat fore-and-aft adjustment
6 Backrest angle
If PRE-SAFE® has been activated, the
front-passeng ...
Important safety notes
WARNING
Never switch off the engine while the vehicle
is in motion.
There is no brake boost for the service brake
if the engine is not running. If the ignition is
switched off, there is also ...