Problems with the sliding sunroof

In the following section, the term "sliding sunroof" refers to the panorama roof with power tilt/sliding panel.

Problem: the sunroof cannot be closed and you cannot see the cause.

WARNING WARNING

You could be severely or even fatally injured when closing the sliding sunroof with increased closing force or if the antientrapment feature is deactivated. Make sure that nobody can become trapped when closing the sliding sunroof.

If the sliding sunroof is obstructed during closing and reopens again slightly:

  • Immediately after the sliding sunroof blocks, pull the panel down to the point of resistance and hold it until the sliding sunroof switch in the overhead control panel down to the point of resistance and hold it until the sliding sunroof is closed. The sliding sunroof is closed with increased force.

If the sliding sunroof is obstructed again during closing and reopens again slightly:

  • Immediately after the sliding sunroof blocks, pull the panel down to the point of resistance and hold it until the sliding sunroof switch in the overhead control panel down to the point of resistance and hold it until the sliding sunroof is closed.

The sliding sunroof is closed without the anti-entrapment feature.

WARNING WARNING

Pressing and holding the sliding sunroof switch to close the sliding sunroof immediately after it had been blocked two times will cause the sliding sunroof to close without the anti-entrapment feature for as long as you hold the switch.

contact a qualified specialist workshop. If the sliding sunroof still cannot be opened or closed as a result of a malfunction, contact a qualified specialist workshop.

    See also:

    Closing the hood
    WARNING When closing the hood, use extreme caution not to catch hands or fingers. Be careful that you do not close the hood on anyone. Make sure the hood is securely engaged before driving of ...

    Clearing the memory of the integrated garage door opener on the rear-view mirror
    X Turn the SmartKey to position 2 in the ignition lock. X Press and hold transmitter buttons 2 and 4 for approximately 20 seconds until indicator lamp 1 flashes rapidly. The memory is cleared. ...

    Load index
    Tire data is vehicle-specific and may deviate from the data in the example. In addition to the load bearing index, load index 1 may be imprinted after the letters that identify speed index 6 ...