Convenience opening feature
You can ventilate the vehicle before you start driving. To do this, the key is used to carry out the following functions simultaneously:
- unlock the vehicle
- open the side windows
- open the panorama roof with power tilt/ sliding panel and the roller sunblinds
The convenience opening feature can only be operated using the SmartKey. The
SmartKey must be close to the driver's door handle.
- Point the tip of the SmartKey at the driver's door handle.
- Press and hold the
button until the side windows and the panorama roof with power tilt/sliding panel are in the desired position.
If the roller sunblinds of the panorama roof with power tilt/sliding panel are closed, the roller sunblinds are opened first.
- Press and hold the
button again until the panorama roof with power tilt/sliding panel is in the desired position.
- To interrupt convenience opening: release the
button.
See also:
Deactivating the HOLD function
The HOLD function is deactivated automatically if:
• you accelerate and the transmission is in position D or R.
• you shift the transmission to position P.
• you apply the brakes again with a ...
Problems with the cooling with air
dehumidification function
If you can no longer switch on the cooling with
air dehumidification function via COMAND,
the cooling with air dehumidification function
is switched off due to a malfunction.
Consult a qualifi ...
Important safety notes
The HomeLink® garage door opener
integrated in the rear-view mirror allows you
to operate up to three different door and gate
systems
Certain garage door drives are
incompatible with the int ...