Changing the battery

You require a CR 2025 3 V cell battery.

  • Take the mechanical key out of the SmartKey ().

  • Press mechanical key 2 into the opening in the SmartKey in the direction of the arrow until battery tray cover 1 opens. When doing so, do not hold cover 1 shut.
  • Remove battery tray cover 1.

  • Repeatedly tap the SmartKey against your palm until battery 3 falls out.
  • Insert the new battery with the positive terminal facing upwards. Use a lint-free cloth to do so.
  • Make sure that the surface of the battery is free from lint, grease and all other forms of contamination.
  • Insert the front tabs of battery tray cover 1 and then press to close it.
  • Insert the mechanical key into the SmartKey.
  • Check the function of all SmartKey buttons on the vehicle.
    See also:

    Cornering light function
    Cornering light function The cornering light function improves the illumination of the road over a wide angle in the direction you are turning, enabling better visibility in tight bends, for ...

    Installing the towing eye
    Remove the towing eye from the vehicle tool kit. WARNING The exhaust tail pipe may be hot. You could burn yourself if you touch the tail pipe. Be particularly careful when removing the rear ...

    Opening the hood
    WARNING Do not pull the release lever while the vehicle is in motion. Otherwise, the hood could be forced open by passing air flow. This could cause the hood to come loose and injure you and/ ...