LATCH-type (ISOFIX) child seat anchors in the rear

WARNING WARNING

Children that are too large for a child restraint must travel in seats using normal seat belts. Position shoulder belt across the chest and shoulder, not face or neck.

In order to attain the correct seating position for children weighing over 41 lb (18 kg), it may be necessary to use a booster seat until they reach a height where a normal lap/shoulder seat belt lies properly across their bodies without the need for a booster seat.

Install the child restraint system according to the manufacturer's instructions.

The child restraint system must be installed firmly on both brackets.

An incorrectly installed child restraint system can come loose in the event of an accident, causing the child to be severely or fatally injured.

Child restraint systems/child restraint retaining brackets that are damaged or have suffered damage due to an impact must be replaced.

LATCH-type (ISOFIX) is a standardized securing system for specially designed child restraint systems on the rear seats. Securing rings for two LATCH-type (ISOFIX) child restraint systems are installed on the left and right of the rear seats.

Secure non LATCH-type (ISOFIX) child restraint systems using the vehicle's seat belt system. Always install child restraint systems according to the manufacturer's instructions.

the center seat does not get trapped. Otherwise, the seat belt could be damaged. When installing the child restraint system, make sure that the seat belt for the center seat does not get trapped. Otherwise, the seat belt could be damaged.

Installation instructions 1 indicate the installation location of securing rings

Installation instructions 1 indicate the installation location of securing rings 2.

  • Install the LATCH-type (ISOFIX) child restraint system. Comply with the manufacturer's instructions when doing so.
    See also:

    Releasing the cargo net
    Seat belt reel holder behind the front seats ► Pull belt adjuster 1 upwards in the direction of the arrow to reduce the tension on the tensioning strap. ► Unhook belt hook 2 from car ...

    Adjusting the four-way lumbar support
    You can adjust the contour of the front seat backrests individually to provide optimum support for your back. 1 To raise the backrest contour 2 To soften the backrest contour 3 To lower the ...

    Adjusting the seats in the second andthird rows
    Important safety notes WARNING   Never travel in a moving vehicle with the seat backrest in an excessively reclined position as this can be dangerous. You could slide under the seat bel ...