Applying/releasing manually
To apply: press handle 1.
The red 
(USA only) or
(Canada
only) indicator lamp in the instrument
cluster lights up.
The electric parking brake can also be
applied when the SmartKey is removed.
To release: switch on the ignition.
Pull handle 1.
The red (USA only) or
(Canada
only) indicator lamp in the instrument
cluster goes out.
The electric parking brake cannot be
released unless the SmartKey is in position
1 in the ignition lock or if the ignition has
been switched on using the Start/Stop
button.
See also:
Vehicle identification number (VIN)
The vehicle identification number (VIN) can
be found in the following locations:
• on the vehicle identification plate
• on the lower edge of the windshield
In addition to being stamped on the ve ...
Decoupling a trailer
WARNING
Do not disconnect a trailer with an engaged overrun brake. Otherwise, your hand
could become trapped between the bumper and trailer drawbar.
Do not disconnect a trailer with an eng ...
Cleaning the steering wheel and gear or
selector lever
•► Thoroughly wipe with a damp cloth or use
leather care agents that have been
recommended and approved by Mercedes-
Benz. ...