Important safety notes

WARNING
Severe conditions (e.g. strong air pollution) may require replacement of the filter before its scheduled replacement interval. A clogged filter will reduce the air volume to the interior and the windows could fog up, impairing visibility and endangering you and others.
Have a blocked filter replaced at a Mercedes- Benz Center as soon as possible.

WARNING
Follow the recommended settings for heating and cooling given on the following pages.
Otherwise, the windows could fog up, impairing visibility and endangering you and others.

The automatic climate control controls the temperature and the humidity in the vehicle interior and filters undesirable substances from the air.

The automatic climate control is only operational when the engine is running.

Optimum operation is only achieved if you drive with the side windows and sliding sunroof/panorama roof with power tilt/sliding panel closed.

You can also set some automatic climate control functions via COMAND.

during warm weather, e.g. using the Ventilate the vehicle for a brief period during warm weather, e.g. using the convenience opening feature.
This will speed up the cooling process and the desired vehicle interior temperature will be reached more quickly.

particles of dust and completely filters out The integrated filter can filter out most particles of dust and completely filters out pollen. A clogged filter reduces the amount of air supplied to the vehicle interior. For this reason, you should always observe the interval for replacing the filter, which is specified in the Service Booklet. As it depends on environmental conditions, e.g. heavy air pollution, the interval may be shorter than stated in the Service Booklet.

activated automatically 40 minutes after It is possible that the blower may be activated automatically 40 minutes after the SmartKey is removed. The vehicle is then ventilated for 30 minutes to dry the air-conditioning system.

    See also:

    Instruction labels for tires and loads
    WARNING   Do not overload the tires by exceeding the specified load limit as indicated on the Tire and Loading Information placard on the driver's door B-pillar. Overloading the tires c ...

    Restricting the shift range
    Pull the left-hand steering wheel paddle shifter. The automatic transmission shifts down one gear and restricts the shift range to the relevant gear. If the engine exceeds the maximum engi ...

    Resetting to factory settings
    For safety reasons, the Daytime Running Lights: function in the Lights submenu is only reset when the vehicle is stationary. Press the or button on the steering wheel to select the Settin ...