High-beam headlamps

turn the SmartKey in the ignition lock to To switch on the high-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine.

Press the combination switch beyond the Turn the light switch to Press the combination switch beyond the.

pressure point in the direction of Press the combination switch beyond the pressure point in the direction of arrow 1.

The instrument indicator lamp in the instrument cluster lights up.

headlamps: move the combination switch To switch off the high-beam headlamps: move the combination switch back to its normal position.

The instrument indicator lamp in the instrument cluster goes out.

    See also:

    Trailer load/noseweight
    The trailer load/noseweight affects the gross weight of the vehicle. If a trailer is attached, the trailer load/noseweight is included in the load along with occupants and luggage. The trailer ...

    Problems with the engine
    Problem The engine does not start. The starter motor can be heard. Possible causes/consequences and Solutions There is a malfunction in the engine electronics. There is a malfunction in the fu ...

    Cleaning the seat belts
    Use clean, lukewarm water and soap solution. Do not clean the seat belts using chemical cleaning agents. Do not dry the seat belts by warming them above 176 °F (80 °C) or placing them in di ...