Copying data to a storage medium
Insert an SD card into the SD card slot
or
Insert a USB stick into the socket on the
side in the glove box.
Select Vehicle in the main function bar by
turning
the COMAND controller and
press
to confirm.
The "Vehicle" menu appears.
Select System and press
to
confirm.
Select Upload/Download Data and press
to confirm.
Select Copy Data to Storage Medium
and press
to confirm.
Select the storage medium to which the
data should be copied.
Select Start Copying.
COMAND checks whether the storage medium has enough storage capacity. If there is enough storage capacity, the data is copied to the storage medium.
If there is not enough storage capacity,
remove the storage medium. Make more
storage space available on the storage
medium. Then, try to copy the COMAND
data to the storage medium again.
Remove the storage medium.
See also:
Emergency Tensioning Devices, belt force limiters
The front seat belts and the outer seat belts
in the rear are equipped with ETDs and seat
belt force limiters.
The ETDs tighten the seat belts in an accident,
pulling them close against the bod ...
System self-test
The indicator lamp illuminates
when you:
• turn the SmartKey to position 1 or 2 in the ignition lock
• on vehicles with KEYLESS-GO, press the Start/Stop button once or twice
If an adult occupant ...
Using KEYLESS-GO to start the engine
WARNING
As long as the SmartKey is in your vehicle, the
vehicle can be started. Therefore, never leave
children unattended in the vehicle, as they
could otherwise accidentally start the eng ...