General notes
In this menu, you can set the following vehicle functions:
• ECO
• multicontour seat settings
• rear window blind
• EASY-ENTRY/EXIT feature
• exterior lighting delayed switch-off
• interior lighting delayed switch-off
• ambient lighting
• automatic folding mirror
• locator lighting
• automatic locking feature
• trunk lid opening height restriction
You can open the "Vehicle" menu in one of two ways.
Opening the "Vehicle" menu from the main area in the center of the display
1 "Vehicle" menu item
2 Main area
Select Vehicle in the main function bar by
sliding
and turning
the
COMAND controller and press
to
confirm.
Main area 2 is active.
Select the individual vehicle functions by
sliding
or turning
the COMAND
controller and press
to confirm.
Opening from the "Vehicle" menu
Select Vehicle in the main function bar by
sliding
and turning
the
COMAND controller and press
to
confirm.
The "Vehicle" submenu opens.
Select the individual vehicle functions in
the menu by sliding
or turning
the COMAND controller and press
to
confirm.
In the next section, it is the first procedure that is always described.
See also:
Vehicle identification plate
Even if you have calculated the total load
carefully, you should still make sure that the
gross vehicle weight rating and the gross axle
weight rating are not exceeded. Details can
be found on ...
Brake fluid level
If you notice that the brake fluid level in
the brake fluid reservoir has fallen to the
MIN mark or less, check the brake system
immediately for leaks. Also check the
thickness of the brake lini ...
Clearing the shift range restriction
- Pull and hold the right-hand steering wheel
paddle shifter until D is shown again in the
multifunction display.
The automatic transmission shifts from the
current shift range directly to D.
...