Inserting/ejecting CDs/DVDs

DVD changer

The DVD changer has a fixed magazine with six trays.

Magazine tray status 3:

Magazine tray status 3:

• Indicator lamp off: magazine tray is empty.

• Indicator lamp constantly lit: magazine tray is loaded.

respective button 3. To load a single magazine tray: press respective button 3.

slot 1. Remove any CD/DVD which may be in slot 1.

which has been pressed flashes quickly. Wait until the indicator lamp for button 3 which has been pressed flashes quickly.

slot 1. Insert the CD/DVD to be loaded into slot 1.

If the CD/DVD has been inserted properly and it is a permissible type, the last CD/DVD loaded will be played.

button 2. To load all six magazine trays: press button 2.

The DVD changer checks the load status of all magazine trays and switches to the first empty tray.

respective button flashes quickly. Wait until the indicator lamp for the respective button flashes quickly.

The DVD changer switches to the next Insert a disc into slot 1.

The DVD changer switches to the next empty magazine tray.

loaded. Repeat the last two steps until all trays are loaded.

If the CD/DVD has been inserted properly and it is a permissible type, the last CD/DVD loaded will be played.

another disc, the DVD changer interrupts If you remove one disc while playing another disc, the DVD changer interrupts playback. Playback continues once the disc has been removed.

3. To remove a disc: press respective button 3.

If the CD/DVD is not removed from Remove the CD/DVD from slot 1.

If the CD/DVD is not removed from slot 1, it will be automatically drawn in again after a short while.

The DVD changer ejects the CD/DVD from To remove all discs: press button 4.

The DVD changer ejects the CD/DVD from the tray currently in use.

The DVD changer switches to the next Remove the CD/DVD from slot 1.

The DVD changer switches to the next loaded magazine tray and ejects the CD/DVD.

empty. Repeat the last step until the magazine is empty.

    See also:

    Range of the sensors
    General notes The sensors must be free of dirt, ice and slush; otherwise they may not function correctly. Clean the sensors regularly, taking care not to scratch or damage them. Side view ...

    Setting the side air vents
    To open/close: turn thumbwheel 3 up or down. Side window defroster vent 1 is never completely shut, even if side air vent 2 is shut. ...

    Charging the battery
    WARNING Never charge a battery still installed in the vehicle unless a battery charger unit approved by Mercedes-Benz is being used. Gases may escape during charging and cause explosions tha ...