Requirements for a Bluetooth® connection

You can connect mobile phones and notebooks to COMAND.

To do so, the following conditions need to be met:
• Bluetooth®-capable devices, e.g. mobile phones, must comply with a certain profile in order to be connected to COMAND.
Every Bluetooth® device has its own specific Bluetooth® name.
• Bluetooth® must be activated in COMAND and on the respective Bluetooth® device; see the separate operating instructions.
• the Bluetooth® device must be "visible" to COMAND in order for COMAND to find and display it. For the setting procedures, please see the operating instructions for the Bluetooth® device.

connected, reception and transmission Once a mobile phone has been connected, reception and transmission volume may change.

    See also:

    Cleaning the steering wheel and gear or selector lever
    Thoroughly wipe with a damp cloth or use leather care agents that have been recommended and approved by Mercedes- Benz. ...

    Emergency Tensioning Devices, belt force limiters
    The front seat belts and the outer seat belts in the rear are equipped with ETDs and seat belt force limiters. The ETDs tighten the seat belts in an accident, pulling them close against the bod ...

    Making adjustments in 5 mph (Canada: 10 km/h) increments
    Briefly press the cruise control lever beyond the pressure point, up 1 for a higher speed or down 2 for a lower speed. The last speed stored is increased or reduced. ...