Swiveling the COMAND display and setting the brightness

You can swivel the COMAND display. The buttons are located beside the COMAND display.

Swiveling

Swiveling
Swiveling

1 To swivel the display to the left
2 To swivel the display to the right

Setting the brightness

Setting the brightness
Setting the brightness

1 Brightness of the instrument cluster lighting 2 Brightness of the COMAND display

Brighter or dimmer:

If Night View Assist Plus is activated, only Turn control 1 or 2 clockwise or counterclockwise.

the brightness of the multifunction display If Night View Assist Plus is activated, only the brightness of the multifunction display is adjusted with control 1.

Display design

When the default settings are selected, the display automatically switches between day design and night design.

You can change these settings using COMAND.

    See also:

    Starting procedure with the SmartKey
    To start the engine using the SmartKey instead of KEYLESS-GO, pull the Start/ Stop button out of the ignition lock. •►  To start a gasoline engine: turn the SmartKey to position 3 in ...

    Traction
    WARNING   The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction charac ...

    Transmission positions
    Park position Do not shift the transmission into position P unless the vehicle is stationary. The parking lock should not be used as a brake when parking. In addition to engaging the parki ...