Operating the front roller sunblind
WARNING
When opening or closing the front roller
sunblind, make sure no one is in danger of
being injured by the opening or closing
procedure.
The front roller sunblind is equipped with
automatic operation and the anti-entrapment
feature. If the movement of the front roller
sunblind is blocked during the closing
procedure, the front roller sunblind will stop
and retract slightly.
The opening or closing of the front roller
sunblind can be immediately halted by
releasing the roof panel switch or, if the roof
panel switch was moved past the resistance
point and released, by moving the roof panel
switch in any direction.
Overhead control panel
1 To open
2 To open
3 To close
Turn the SmartKey to position 1 or 2 in the
ignition lock.
Press or pull the switch in the
corresponding direction.
If you press the switch beyond the point of resistance, an automatic opening/closing process is started in the corresponding direction. You can stop automatic operation by operating the switch again.
See also:
Clearing the memory of the integratedgarage door opener on the rear-viewmirror
► Turn the SmartKey to position 2 in the
ignition lock.
► Press transmitter buttons 2 and 4.
The indicator lamp lights up yellow.
► Press and hold transmitter buttons 2 and 4 ...
Safety guidelines for seat belts, Emergency Tensioning Devices (ETDs) and
air bags
WARNING
• Damaged seat belts or seat belts that have
been subjected to stress in an accident
must be replaced. Their anchoring points
must also be checked. Only use seat belts
installed or ...
Safety notes
WARNING
Work improperly carried out on electronic
components and associated software could
cause them to cease functioning. Because the
vehicle's electronic components are
interconnected, an ...