Checking tire pressure electronically
•► Make sure that the SmartKey is in position 2 in the ignition lock.
•► Press the button on the steering wheel to select the Service menu.
•► Press the button to select Tire Pressure.
•► Press the button.
The current tire pressure for each wheel will be displayed in the multifunction display.
If the vehicle has been parked for longer than 20 minutes, the Tire pressures will be displayed after driving a few minutes message appears in the display.
After a teach-in period, the tire pressure monitor automatically recognizes new wheels or new sensors. If a clear allocation of the tire pressure values to the individual wheels is not possible, the Tire Pressure Monitor Active message is shown instead of the tire pressure display. The tire pressures are already being monitored.
If a spare wheel/emergency spare wheel is mounted, the system may continue to show the tire pressure of the wheel that has been removed for a few minutes. If this occurs, note that the value displayed for the position where the spare tire is mounted is not the same as the spare wheel/emergency spare wheel's current tire pressure.
See also:
Checking the coolant level
Only check the coolant level when the vehicle
is on a level surface and the engine has cooled
down.
– Turn the SmartKey to position
2 (Y page 139) in the ignition lock.
On vehicles with KEYLES ...
E-Class Wagon in the Market
The E350 wagon joins a redesigned E-Class that's been a success by any
measure. The wagon comes up short in terms of execution, but given the car's
pedigree — and the fact that there's an E63 AMG ...
Selecting a folder
This function is only available in MP3 mode.
Switch on MP3 mode.
Select Search by sliding and
turning
the COMAND controller and press
to confirm.
Select Folder by sliding and
turning ...