Installing/removing the towing eye
Installing the towing eye
•► Remove the towing eye from the vehicle tool kit
WARNING
The exhaust tail pipe may be hot. You could
burn yourself if you touch the tail pipe. Be
particularly careful when removing the rear
cover.
The mountings for the removable towing eyes are located in the bumpers. They are at the front and at the rear, under the covers.
Example: Sedan
•► Press the mark on cover 1 inwards in the direction of the arrow.
•► Take cover 1 off the opening.
•► Screw the towing eye in clockwise to the stop and tighten it.
Removing the towing eye
•► Loosen the towing eye and unscrew it.
•► Attach cover 1 to the bumper and press until it engages.
•► Place the towing eye in the vehicle tool kit.
See also:
Installing the towing eye
Remove the towing eye from the vehicle
tool kit.
WARNING
The exhaust tail pipe may be hot. You could
burn yourself if you touch the tail pipe. Be
particularly careful when removing the rear ...
Blind Spot Assist
Important safety notes
Blind Spot Assist uses a radar sensor system
to monitor the areas on both sides of your
vehicle. It supports you from speeds of
approximately 20 mph (30 km/h). A warning ...
Moving the map
Showing the crosshair
To hide the menu: slide
the COMAND
controller and, when the Full screen
menu item is shown, press .
To move the map: slide ,
or
the COMAND controller.
A crosshai ...