Cleaning the wiper blades
WARNING
Before cleaning the windshield or wiper
blades, switch off the windshield wipers and
remove the SmartKey from the ignition lock.
On vehicles with KEYLESS-GO, press the Start/Stop button repeatedly until all indicator lamps in the instrument cluster have gone out. The windshield wipers could otherwise move and injure you.
Do not pull the wiper blade. Otherwise, the wiper blade could be damaged.
Do not clean wiper blades too often and do not rub them too hard. Otherwise, the graphite coating could be damaged. This could cause wiper noise.
•► Fold the wiper arms away from the windshield.
•► Carefully clean the wiper blades with a damp cloth.
•► Fold the windshield wipers back again before switching on the ignition.
Hold the wiper arm securely when folding back. The windshield could be damaged if the wiper arm smacks against it suddenly.
See also:
Active Lane Keeping Assist
Important safety notes
Active Lane Keeping Assist monitors the area
in front of your vehicle by means of a camera
at the top of the windshield. Active Lane
Keeping Assist detects lane markings ...
SmartKey
Display messages
Possible causes/consequences and
Solutions
You have put the wrong SmartKey in the ignition lock.
– Use the correct SmartKey.
The Sma ...
Important safety notes
WARNING
When opening or closing the door windows,
make sure that there is no danger of anyone
being harmed by the opening/closing
procedure.
The door windows are equipped with
automatic op ...