MB Info call button
•► Press and hold MB Info call button 1 for more than two seconds.
This initiates a call to the Mercedes-Benz Customer Assistance Center. The indicator lamp in MB Info call button 1 flashes while the connection is being established. The Connecting Call message appears in the multifunction display. The audio output is muted.
If a connection can be established, the Call Connected message appears in the multifunction display.
If a cellular phone network is available and there is sufficient GPS reception, the mbrace system transmits data to the Mercedes-Benz Customer Assistance Center, for example:
- current location of the vehicle
- vehicle identification number
The COMAND display shows that an mbrace call is active. During the call, you can change to the navigation menu by pressing the NAVI button on COMAND, for example.
Voice output is not available.
A voice connection is established between the Mercedes-Benz Customer Assistance Center and the vehicle occupants. You can obtain information on how to operate your vehicle's systems, on the location of the nearest authorized Mercedes-Benz Center, and on further products and services offered by Mercedes-Benz USA.
Further details on the mbrace system can be found under http://www.mbusa.com26.
Log in under "Owners Online".
The mbrace system failed to initiate an MB Info call if:
- the indicator lamp in MB Info call button 1 is flashing continuously.
- no voice connection to the Mercedes- Benz Customer Assistance Center was established.
This may be because the corresponding mobile phone network is not available.
The Call Failed message appears in the multifunction display.
•► To end a call: press the button on the multifunction steering wheel.
or
•► Press the corresponding button for ending
a phone call on COMAND.
See also:
Switching on/off
The three red indicator lamps in the button indicate the heating level you have
selected.
If the battery voltage is too low, the seat heating may switch off.
Driver's and front-passenger ...
Important safety notes
Do not leave the SmartKey in the trunk/cargo
compartment. You could otherwise lock
yourself out.
WARNING
When leaving the vehicle, always remove the
SmartKey from the ignition lock. Always ...
Changing gea
The automatic transmission shifts to the
individual gears automatically when it is in
transmission position D. This automatic
gearshifting behavior is determined by:
- a shift range restr ...