Tips for driving with DISTRONIC PLUS
Important safety notes
The following contains descriptions of certain road and traffic conditions in which you must be particularly attentive. In such situations, brake if necessary. DISTRONIC PLUS is then deactivated.
WARNING
The DISTRONIC PLUS works to maintain the
speed selected by the driver unless a moving
obstacle proceeding directly ahead of it in the same travel direction is
detected (e.g.
following another vehicle ahead of you at your set distance).
This means that:
- Your vehicle can pass another vehicle after
you have changed lanes.
- While in a sharp turn or if the preceding
vehicle is in a sharp turn, the DISTRONIC
PLUS could lose sight of the preceding
vehicle. Your vehicle could then accelerate
to the previously selected speed.
The DISTRONIC PLUS regulates only the distance between your vehicle and those directly ahead of it. It may not register stationary objects in the road, e.g.:
- a stopped vehicle in a traffic jam
- a disabled vehicle
- an oncoming vehicle
The driver must always be alert, observe all traffic and intercede as required by means of steering or braking the vehicle.
WARNING
The DISTRONIC PLUS should not be used in
snowy or icy road conditions.
Cornering, going into and coming out of a bend
The ability of DISTRONIC PLUS to detect vehicles when cornering is limited. Your vehicle may brake unexpectedly or late.
Vehicles traveling on a different line
DISTRONIC PLUS may not detect vehicles traveling on a different line. The distance to the vehicle in front will be too short.
Other vehicles changing lane
DISTRONIC PLUS has not detected the vehicle cutting in yet. The distance to this vehicle will be too short.
Narrow vehicles
DISTRONIC PLUS has not yet detected the vehicle in front on the edge of the road, because of its narrow width. The distance to the vehicle in front will be too short.
Obstructions and stationary vehicles
DISTRONIC PLUS does not brake for obstacles or stationary vehicles. If, for example, the detected vehicle turns a corner and reveals an obstacle or stationary vehicle, DISTRONIC PLUS will not brake for these.
Crossing vehicles
DISTRONIC PLUS may mistakenly detect vehicles that are crossing your lane.
Activating DISTRONIC PLUS at traffic lights with crossing traffic, for example, could cause your vehicle to pull away unintentionally.
See also:
Cleaning the seat belts
Use clean, lukewarm water and soap
solution.
Do not clean the seat belts
using chemical
cleaning agents. Do not dry the seat belts
by warming them above 176 °F (80 °C) or
placing th ...
Displaying the range and current fuel consumption
Press the or
button on the steering wheel to
select the Trip menu.
Press the or
button to select current fuel consumption
and approximate range.
Current fuel consumption
A ...
Crash-responsive emergency lighting
The interior lighting is activated automatically
if the vehicle is involved in an accident.
•► To switch off the crash-responsive
emergency lighting: press the hazard
warning lamp button. ...