Storing the current speed or calling up the last stored speed
WARNING
The set speed stored in memory should only
be set again if prevailing road conditions and
legal speed limits permit. Possible
acceleration or deceleration differences
arising from returning to the preset speed
could cause an accident and/or serious injury
to you and others.
•► Briefly pull the cruise control lever towards you 4.
•► Remove your foot from the accelerator pedal.
The first time cruise control is activated, it stores the current speed or regulates the speed of the vehicle to the previously stored speed.
See also:
Shifting to transmission position D
- When the vehicle is stationary, depress the
brake pedal.
- Push the DIRECT SELECT lever down past
the first point of resistance. ...
Introduction
You can establish a Bluetooth® connection to
COMAND (see the separate operating
instructions).
WARNING
A driver's attention to the road must always
be his/her primary focus when driving. For ...
Overview: changing bulbs/bulb types
You can change the following bulbs. The bulb
type can be found in the legend.
Halogen headlamps
1 Parking lamp/standing lamp: W 5 W
2 High-beam headlamp: H7 55 W
3 Low-beam headlamp: H7 55 W
...
