Important safety notes
WARNING
For safety reasons, switch off the windshield
wipers and remove the key from the ignition
lock before changing the wiper blades
(vehicles with KEYLESS-GO: make sure that
the on-board electronics are in state 0).
Otherwise, the wiper motor could be switched on suddenly and cause injury.
To avoid damaging the wiper blades, make sure that you touch only the wiper arm of the wiper.
Never open the hood if a windshield wiper arm has been folded away from the windshield.
Never fold a windshield wiper arm without a wiper blade back onto the windshield/ rear window.
Hold the windshield wiper arm firmly when you change the wiper blade. If you release the windshield wiper arm without a wiper blade and it falls onto the windshield, the windshield may be damaged by the force of the impact.
Mercedes-Benz recommends that you have the wiper blades replaced by a qualified specialist workshop, e.g. at an authorized Mercedes-Benz Center.
See also:
Controlling the rear-compartment
climate control automatically using the
rear control panel
Turn the SmartKey to position 2 in the
ignition lock.
Set the desired temperature.
To activate: press rocker switch 15 up or
down and select AUTO.
To deactivate: press rocker switch 15 up
...
Removing the ball coupling
Observe the manufacturer's installation instructions.
Press the protective cap into the ball coupling recess.
Make sure that the protective cap is firmly in place.
...
Preparing the cargo net
The cargo net can be used in two different positions (behind the B-pillar or
the C-pillar).
The brackets behind B-pillar : are required for the cargo compartment enlargement
(). The corresp ...