High-beam headlamps
•► To switch on the high-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine.
•► Turn the light switch to
or
.
•► Press the combination switch beyond the pressure point in the direction of arrow 1.
In the position, the high-beam
headlamps are only switched on when it is
dark and the engine is running.
The indicator lamp in the
instrument
cluster lights up when the high-beam
headlamps are switched on.
•► To switch off the high-beam headlamps: move the combination switch back to its normal position.
The indicator lamp in the
instrument
cluster goes out.
See also:
Limiting the opening angle of the
tailgate (Wagon)
Important safety notes
You can limit the opening angle of the
tailgate. This is possible in the top half of its
opening range, up to approximately
8 in (20 cm) before the stop.
Make sure there ...
Brake lamp
- Switch off the lights.
- Open the cargo compartment.
- Open the service flap.
1 Brake lamp
- Turn the bulb holder counter-clockwise and remove it.
- Remove the bulb from the bulb holder.
- I ...
Setting the ambient light
You can make the following settings:
• SOLAR (yellow interior lighting)
• NEUTRAL (white interior lighting)
• POLAR (blue interior lighting)
• Brightness of the interior lighting on a scal ...