Changing the settings of the locking system
You can change the setting of the locking system in such a way that only the driver's door and the fuel filler flap are unlocked. This is useful if you frequently travel on your own.
•► To change the setting: press and hold
down the 
and
buttons
simultaneously for approximately six
seconds until the battery check lamp flashes twice.
If the setting of the locking system is
changed within the signal range of the
vehicle, pressing the 
or
button
locks or unlocks the vehicle.
The SmartKey now functions as follows:
•► To unlock the driver's door: press the
button once.
•► To unlock centrally: press the
button twice.
•► To lock centrally: press the
button.
The KEYLESS-GO function is changed as follows:
•► To unlock the driver's door: touch the
inner surface of the door handle on the
driver's door.
•► To unlock centrally: touch the inner
surface of the door handle on the frontpassenger
door or the rear door.
•► To lock centrally: touch the outer sensor
surface on one of the door handles.
See also:
The spray nozzles are misaligned
The windshield washer fluid from the spray
nozzles no longer hits the center of the
windshield. The spray nozzles are misaligned.
Have the spray nozzles adjusted
at a
qualified specialist wo ...
Transfer case
The vehicle has permanent 4-wheel drive
(4MATIC). Power is always transmitted to
both axles.
Performance tests may only be carried
out on a 2-axle dynamometer. The brake
system or transfer ca ...
Top Tether
Top Tether provides an additional connection
between the child restraint system secured
with ISOFIX and the rear seat. It helps reduce
the risk of injury even further.
The Top Tether anchorage ...