Releasing seat belts
- Press release button 4 and guide belt tongue ; back towards belt sash guide 1.
Make sure that the seat belt is fully rolled up. Otherwise, the seat belt or belt tongue will be trapped in the door or in the seat mechanism. This could damage the door, the door trim panel and the seat belt.
Damaged seat belts can no longer fulfill their protective function and must be replaced. Consult an authorized Mercedes- Benz Center.
See also:
Calling up a stored setting
► Press and hold the relevant storage
position button 1, 2 or 3 until the seat,
steering wheel and exterior mirrors are in
the stored position.
The setting procedure is interrupted as
soon ...
Problems with the steering wheel
heating
If steering wheel heating indicator lamp 3 is
flashing, the steering wheel heating has
switched off automatically. The vehicle's
electrical system voltage is too low because
too many electrica ...
Automatic headlamp mode
- To switch on automatic headlamp
mode: turn the light switch to or
.
SmartKey in position 1 in the ignition lock:
the parking lamps are switched on or off
automatically depending on the brig ...