Calling up a stored parking position setting
Turn the SmartKey to position
2 in the
ignition lock.
Adjust the exterior mirror on the
frontpassenger
side with the corresponding
button.
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger side moves back to its original
position:
• as soon as you exceed a speed of 6 mph
• about ten seconds after you have disengaged reverse gear
• if you press button 1 for the exterior mirror on the driver's side
See also:
Important safety notes
Consult an authorized Mercedes-Benz Center
if you require information on approved and
recommended tires and wheels for summer
and winter operation. Advice on purchasing
and caring for tires is ...
Notes for 4MATIC vehicles
Vehicles with 4MATIC must not be towed with either the front or the rear axle
raised, as doing so will damage the transmission.
If the vehicle has transmission damage or damage to the front or r ...
Useful information
This Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differences are ...