Opening and closing

sliding You can continue to operate the sliding sunroof after switching off the engine or removing the SmartKey from the ignition lock. This function is available for up to five minutes or until the driver's or frontpassenger door is opened.

Overhead control panel
Overhead control panel

1 To raise
2 To open
3 To close/lower

1 or 2 in the ignition lock. Turn the SmartKey to position 1 or 2 in the ignition lock.
switch in the corresponding Press or pull the direction. switch in the corresponding direction.

switch beyond the If you press the point of resistance, an automatic opening/closing process is started in the switch beyond the point of resistance, an automatic opening/closing process is started in the corresponding direction. You can stop automatic operation by operating the switch again.
When opening and raising the roof, automatic operation is only available if the sliding sunroof is in the closed position.

The sun protection cover automatically opens along with the sliding sunroof. You can open or close the sun protection cover manually when the sliding sunroof is raised or closed.

    See also:

    Engines: new CDI-four-cylinder units with a fuel consumption of just 5.3 litres and 139 grams of CO2 per kilometre
    With three completely newly developed four-cylinder engines, the Mercedes-Benz E-Class also remains one generation ahead where diesel technology is concerned. These engines feature latest-generati ...

    Aspect ratio
    Relationship between tire height and tire width in percent. ...

    Vehicles with automatic transmission
    Apply the electric parking brake. Shift the transmission to position P. Using the SmartKey Turn the SmartKey to position 0 in the ignition lock and remove it. The immobilizer is activated. ...