Assistants to see and be seen better
The Adaptive High Beam Assist system is now offered as standard equipment on the Mercedes-Benz CL-Class. This camera-based system can recognize oncoming vehicles or vehicles ahead with their lights on, and then softly transitions from high-beam to low beam to create the best possible lighting conditions without dazzling other drivers. In addition, Mercedes-Benz offers the optional Night View Assist PLUS system for the Mercedes-Benz CL-Class, featuring a special infra-red camera for pedestrian detection: pedestrians are now specifically highlighted in the display, to help alert the drivers in low light conditions.
On European models, the images supplied by the windshield-mounted camera are
also used by the new, optional Speed Limit Assist (not available in the U.S.),
which recognizes speed limit signs in passing and shows the relevant speed limit
in the central display and on the navigation system's map display.
For the new-generation CL-Class, Mercedes-Benz has also improved the long and
medium-range radar used by Brake Assist (BAS PLUS) and DISTRONIC PLUS proximity
cruise control.
An "electronic crumple zone": the PRE-SAFE® Brake
Mercedes-Benz offers another radar based system for the luxury coupé as a component of the Driver Assistance Package: PRE-SAFE® Brake with automatic emergency braking. If the driver is distracted and fails to recognize the imminent danger of a rear-end collision or the warning signal of an assistance system, PRE-SAFE Brake can intervene and autonomously apply partial braking. If the driver fails to react even after automatic, partial braking action, this new version of PRE-SAFE® Brake activates maximum braking pressure around 0.6 seconds before an unavoidable collision - this emergency braking action can significantly mitigate the severity of the impact. The PRE-SAFE® Brake thus acts as a kind of "electronic crumple zone".
See also:
Notes on driving
- If the vehicle is heavily laden, check the tire
pressures and correct them if necessary.
- When parking your vehicle, make sure that
the tires do not get deformed by the curb
or o ...
Removing a wheel
► Unscrew the uppermost wheel bolt
completely.
► Screw alignment bolt 1 into the thread
instead of the wheel bolt.
► Unscrew the remaining wheel bolts fully.
Do not place wh ...
Mute
Switching audio and video sources on/off
Press the button on the
multifunction
steering wheel.
The sound from the respective audio or
video source is switched on or muted.
When the sound ...