Stowing a used collapsible spare wheel
Take the following steps to stow a used collapsible spare wheel. It will otherwise not fit in the spare wheel well. Mercedes-Benz recommends that you have this work carried out at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center.
Only place the collapsible spare wheel in the vehicle when it is dry. Otherwise, moisture may get into the vehicle.
- Remove the valve extractor from the vehicle tool kit.
- Unscrew the valve cap from the valve.
- Unscrew the valve insert from the valve and release the air.
Fully deflating the tire can take a few minutes.
- Screw the valve insert back into the valve.
- Screw the valve cap back on.
- Place the valve extractor back into the vehicle tool kit.
- Stow the collapsible spare wheel in the emergency spare wheel well under the cargo compartment and fasten in place.
See also:
Redialing
The on-board computer saves the last names or numbers dialed in the redial memory.
Press the or
button on the steering wheel to
select the Tel menu.
Press the button to switch
to the ...
View through the camera
The area behind the vehicle is displayed in a mirror-inverted manner, as in the
rear-view mirror.
WARNING
The rear view camera is only an aid and may display obstacles
from a distorted pe ...
Opening the hood
WARNING
Do not pull the release lever while the vehicle is in motion. Otherwise, the
hood could be forced open by passing air flow. This could cause the hood to come
loose and injure you and ...