Preparing the cargo net
The cargo net can be used in two different positions (behind the B-pillar or the C-pillar).
- The brackets behind B-pillar : are required for the cargo compartment enlargement (). The corresponding cargo tie down rings to tighten the net are located in the footwell of the rear bench seat ().
- The brackets behind C-pillar ; are required for the cargo compartment behind the rear bench seat.
The corresponding cargo tie down rings to tension the net are located in the cargo compartment ().
The cargo net is located in the loading tray in the stowage well under the trunk floor ().
- Open both Velcro fasteners and remove the cargo net.
- Unroll and unfold the cargo net. The upper and lower guide rods must engage audibly.
See also:
Entering a point of interest in the
vicinity of the destination
Entering a point of interest in the vicinity of
the destination is only possible when route
guidance is active.
Select Destination Area from the menu
and press to confirm.
Continue with ass ...
Please bear the following in mind
Resetting the service interval display
A qualified specialist workshop, e.g. an
authorized Mercedes-Benz Center, will reset
the service interval display after the
necessary service work has bee ...
Replacing the windshield wiper blades
Removing the wiper blades
Remove the SmartKey from the
ignition lock or turn it to position 0 (KEYLESS-GO).
Fold the wiper arm away from the
windshield until it engages.
Set the wiper blade ...