Trip computer "From start" or "From reset"

The values in the From start submenu are calculated from the start of a journey, while the values in the From Reset submenu are calculated from the last time the submenu was reset ().

  • Press the button on the steering wheel to or select the Trip menu. button on the steering wheel to select the Trip menu.
  • Press the button to select From Start or or From Reset. button to select From Start or From Reset.

Trip computer "From start" (example)

Trip computer "From start" (example)

  1. Distance
  2. Time
  3. Average speed
  4. Average fuel consumption

The From Start trip computer is reset automatically when:

  • the ignition has been switched off for more than four hours.
  • 999 hours have been exceeded.
  • 9,999 miles have been exceeded.

When 9,999 hours or 99,999 miles have been exceeded, the trip computer is automatically reset From Reset.

    See also:

    Useful information
    This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differenc ...

    Securing cargo
    Plastic hooks (Sedan) On vehicles without a through-loading feature in the rear bench seat, six plastic hooks are installed to the trunk floor. Cargo tie-down rings Observe the following note ...

    Setting the specified minimum distance
    You can set the specified minimum distance for DISTRONIC PLUS by varying the time span between one and two seconds. With this function, you can set the minimum distance that DISTRONIC PLUS kee ...