Vehicles with automatic transmission

  • Apply the parking brake firmly.
  • Shift the transmission to position P.

Using the SmartKey

  • Turn the SmartKey to position 0 in the ignition lock and remove it. The immobilizer is activated.

Using KEYLESS-GO The SmartKey can only be removed if the transmission is in position P.

Using KEYLESS-GO

  • Press the Start/Stop button (). The engine stops and all the indicator lamps in the instrument cluster go out.

When the driver's door is open, it corresponds to SmartKey position 0 or "SmartKey When the driver's door is closed, this corresponds to SmartKey position 1. When the driver's door is open, it corresponds to SmartKey position 0 or "SmartKey removed".

If you attempt to switch off the engine while the selector lever is in a position other than P, a message appears in the multifunction display and you hear a tone.

by pressing and holding the Start/Stop button for three seconds. In an emergency, the engine can be turned off while the vehicle is in motion by pressing and holding the Start/Stop button for three seconds.

    See also:

    Resetting values
    You can reset the values of the following functions: - Trip odometer - Trip computer "From start" - Trip computer "From reset" – Press the or button on the steering whee ...

    Clearing the memory of the integratedgarage door opener on the rear-viewmirror
    ► Turn the SmartKey to position 2 in the ignition lock. ► Press transmitter buttons 2 and 4. The indicator lamp lights up yellow. ► Press and hold transmitter buttons 2 and 4 ...

    Storing the current speed or calling up a stored speed
    WARNING The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising from ...