Important safety notes
WARNING
Severe conditions (e.g. strong air pollution) may require replacement of the filter before its scheduled replacement interval. A clogged filter will reduce the air volume to the interior and the windows could fog up, impairing visibility and endangering you and others. Have a blocked filter replaced at a Mercedes- Benz Center as soon as possible.
WARNING
Follow the recommended settings for heating and cooling given on the following pages. Otherwise, the windows could fog up, impairing visibility and endangering you and others.
Automatic climate control controls the temperature and the humidity in the vehicle interior and filters undesirable substances from the air.
Automatic climate control is only operational when the engine is running. Optimum operation is only achieved if you drive with the side windows and panorama roof with power tilt/sliding panel closed.
Ventilate the vehicle for a brief period during warm weather, e.g. using the convenience opening feature (). This will speed up the cooling process and the desired vehicle interior temperature will be reached more quickly.
The integrated filter can filter out most particles of dust and completely filters out pollen. A clogged filter reduces the amount of air supplied to the vehicle interior. For this reason, you should always observe the interval for replacing the filter, which is specified in the Service Booklet. As it depends on environmental conditions, e.g. heavy air pollution, the interval may be shorter than stated in the Service Booklet.
It is possible that the residual heat function may be activated automatically an hour after the SmartKey is removed. The vehicle is then ventilated for 30 minutes to dry the air-conditioning system.
See also:
Tire pressure of cold tires
The tires are cold:
• if the vehicle has been parked without
direct sunlight on the tires for at least three
hours and
• if the vehicle has not been driven more than
1 mile (1.6 km). ...
Trailer power supply
The trailer socket of your vehicle is equipped at the factory with a permanent
power supply. The permanent power supply is supplied via trailer socket pin 4.
You can connect accessories with a m ...
Range of the sensors
General notes
The sensors must be free of dirt, ice and slush; otherwise they may not function
correctly. Clean the sensors regularly, taking care not to scratch or damage them
().
Side view
...