Switching the windshield wipers on/ off
WARNING
Wiper blades are components that are subject to wear and tear. Replace the wiper blades twice a year, preferably in the spring and fall. Otherwise the windows will not be wiped properly. As a result, you may not be able to observe surrounding traffic conditions and could cause an accident.
Do not operate the windshield wipers when the windshield is dry, as this could damage the wiper blades. Moreover, dust that has collected on the windshield can scratch the glass if wiping takes place when the windshield is dry.
If the windshield wipers leave smears on the windshield after the vehicle has been washed in an automatic car wash, wax or other residues may be the reason for this. Clean the windshield using washer fluid after washing the vehicle in an automatic car wash.
Combination switch
1 Windshield wipers off
2 Intermittent wipe, low
3 Intermittent wipe, high
4 Continuous wipe, slow
5 Continuous wipe, fast
6 Single wipe/
To wipe the windshield using washer
fluid
- Switch on the ignition.
- Turn the combination switch to the corresponding position.
Vehicles with a rain sensor: if the windshield becomes dirty in dry weather conditions, the windshield wipers may be activated inadvertently. This could then damage the windshield wiper blades or scratch the windshield.
For this reason, you should always switch off the windshield wipers in dry weather.
Vehicles with a rain sensor: in the Ä or Å position, the appropriate wiping frequency is automatically set according to the intensity of the rain. In the Å position, the rain sensor is more sensitive than in the Ä position, causing the windshield wipers to wipe more frequently.
See also:
Inserting the brackets into the loading
rail
– Insert bracket 1 into the center of loading
rail 4.
– Press release button 2 and push
bracket 1 into the desired position in
loading rail 4.
– Let go of release button 2.
– Press lockin ...
Ride & Handling
One of the best aspects of the R350 Bluetec is its comfortable ride. It can
feel floaty on undulating roads and exhibits noticeable body roll when
cornering, but the suspension tuning's emphasis o ...
Changing the set speed
When DSR is activated, the set speed can be
changed to a value between 1 mph and
10 mph (Canada: between 2 km/h and
18 km/h) during the journey.
– To increase or decrease the set speed
in 1 ...