Adjusting the exterior mirrors

WARNING WARNING

Exercise care when using the passenger-side exterior rear view mirror. The mirror surface is convex (outwardly curved surface for a wider field of view). Objects in mirror are closer than they appear. Check your interior rear view mirror and glance over your shoulder before changing lanes.

The exterior mirrors are automatically heated if the rear window defroster is switched on and the outside temperature is low.

  • Make sure that the SmartKey is in position 1 or 2 in the ignition lock.
  • Press button 1 for the left-hand exterior mirror or button 2 for the right-hand exterior mirror. The indicator lamp in the corresponding button lights up in red. The indicator lamp goes out again after some time. You can adjust the selected mirror using adjustment button 3 as long as the indicator lamp is lit.
  • Press adjustment button 3 up, down, to the right or to the left until the exterior mirror is set to a position that provides you with a good overview of traffic conditions.
    See also:

    Low-beam headlamps
    To switch on the low-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine. Turn the light switch to . The indicator lamp on the light switch lights up. ...

    Headlamp cleaning system
    The headlamps are cleaned automatically if the "Wipe with washer fluid" function is operated ten times while the lights are on and the engine is running. When you switch off the igni ...

    Releasing seat belts
    ► Press release button 4 and guide belt tongue 2 back towards belt sash guide 1. Make sure that the seat belt is fully rolled up. Otherwise, the seat belt or belt tongue will be trapped i ...