Special seat belt retractor
All seat belts except the driver's seat belt are equipped with a special seat belt retractor. When activated, the special seat belt retractor ensures the seat belt will not slacken once the child restraint system has been secured.
Installing a child restraint system:
- Always comply with the manufacturer's installation instructions.
- Pull the seat belt smoothly from the inertia reel.
- Engage the seat belt tongue in the belt buckle.
Activating the special seat belt retractor:
- Pull the seat belt out fully and let the inertia reel retract it again.
While the seat belt is retracting, you should hear a ratcheting sound. The special seat belt retractor is enabled. - Push down on the child restraint system to take up any slack.
Removing a child restraint system/ deactivating the special seat belt retractor:
- Always comply with the manufacturer's installation instructions.
- Press the seat belt release button and guide the belt tongue to the belt outlet. The special seat belt retractor is deactivated.
WARNING
Never release the seat belt buckle while the vehicle is in motion, since the special seat belt retractor will be deactivated.
See also:
Problems with air bag deactivation system
WARNING
If the indicator lamp
illuminates and remains illuminated when the weight of a
typical adult or someone larger than a small individual has been detected on the
passenger s ...
Making adjustments in 5 mph (Canada:10 km/h) increments
► Briefly press the cruise control lever
beyond the pressure point, up 1 for a
higher speed or down 2 for a lower speed.
The last speed stored is increased or
reduced. ...
Information about electronic data
acquisition in the vehicle
(Including notice pursuant to California Code
§ 9951)
Your vehicle records electronic data. If your
vehicle is equipped with mbrace1, data is
transmitted in the event of an accident.
This info ...