High-beam spot lamp (vehicles with LED-daytime running lamps)/infrared light (Night View Assist Plus)
Due to their location, have the bulbs in the left-hand headlamp changed at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center.
Switch off the lights.
Open the hood.
Turn housing cover 1 counter-clockwise and pull it out.
Turn bulb holder 2 counter-clockwise and pull it out.
Push the two detents on the right and left of bulb holder 2 and pull the bulb from bulb holder 2.
Insert the new bulb into bulb holder 2 until it engages.
Insert bulb holder 2 into the guide in the headlamp.
Cable outlet 3 must be pointing down and to the right.
Turn bulb holder 2 clockwise.
Cable outlet 3 must be pointing down and to the left.
Align housing cover 1 and turn it clockwise until it engages.
See also:
Tow-starting (emergency starting)
Vehicles with automatic
transmission
must not be started by tow-starting. This
could otherwise damage the transmission. ...
GVW (Gross Vehicle Weight)
The gross vehicle weight comprises the
weight of the vehicle including fuel, tools, the
spare wheel, accessories installed,
occupants, luggage and the drawbar
noseweight, if applicable. The gr ...
Please bear the following in mind
For safety reasons, Mercedes-Benz recommends that you only use Tires and wheels
which have been approved by Mercedes-Benz specifically for your vehicle.
These tires have been specially adapted f ...