Headlamp cleaning system
The headlamps are cleaned automatically if the "Wipe with washer fluid" function is operated ten times while the lights are on and the engine is running. When you switch off the ignition, the automatic headlamp cleaning system is reset and counting is resumed from 0.
See also:
Removing and installing rear head restraints
WARNING
Occupants should only travel sitting on seats which have the head restraints
installed. In the event of an accident, this reduces the risk of injury for passengers
seated in the rear ...
Brake fluid level
If you notice that the brake fluid level in
the brake fluid reservoir has fallen to the
MIN mark or less, check the brake system
immediately for leaks. Also check the
thickness of the brake lini ...
Cleaning the plastic trim
WARNING
When cleaning the steering wheel boss and
dashboard, do not use cockpit sprays or
cleaning agents containing solvents. Cleaning
agents containing solvents cause the surface
to ...