Incoming call
Rejecting or accepting a call
When there is an incoming call, you see a corresponding window in the display.
To reject: select Reject by turning the COMAND controller and press to confirm.
or
Press the button on the telephone keypad or on the multifunction steering wheel.
To accept: confirm Accept by pressing .
or
Press the button on the telephone keypad.
or
Press the or button on the multifunction steering wheel.
Once you have accepted the call, you can use hands-free mode. The call volume can be adjusted. For more information, see the "Functions available during a call" section.
The display shows the phone number or the name and phone number (if the entry is stored in the address book) or shows the Unknown (phone number withheld) message.
You can also accept a call as described above when COMAND is showing the display of a different main application. The display switches to the telephone display after a call is accepted using the COMAND controller or the telephone keypad. After the call is finished, you see the display of the previous main application again.
See also:
Maximum gradient-climbing capability
If the load on the front axle is reduced when pulling away on a steep uphill
slope, the front wheels have a tendency to spin. 4ETS recognizes this and brakes
the wheels accordingly. The rear wh ...
High-beam flasher
- To switch on: turn the SmartKey in the
ignition lock to position 1 or 2 or start the
engine.
- Pull the combination switch in the direction
of arrow 3. ...
Petrol engines: 20 percent fuel saving thanks to direct injection
The E 200 CGI and E 250 CGI are equipped with the newly developed
four-cylinder direct-injection engine with a displacement of 1.8 litres,
turbocharging and variable intake and exhaust camshafts. ...