Releasing seat belts
Press release button 4 and guide belt tongue 2 back towards belt sash guide 1.
Make sure that the seat belt is fully rolled
up. Otherwise, the seat belt or belt tongue
will be trapped in the door or in the seat
mechanism. This could damage the door,
the door trim panel and the seat belt.
Damaged seat belts can no longer fulfill
their protective function and must be
replaced. Consult an authorized Mercedes-
Benz Center.
See also:
Vehicle identification plate
Even if you have calculated the total load
carefully, you should still make sure that the
gross vehicle weight rating and the gross axle
weight rating are not exceeded. Details can
be found on ...
Calling up a stored setting
► Press and hold the relevant storage
position button 1, 2 or 3 until the seat,
steering wheel and exterior mirrors are in
the stored position.
The setting procedure is interrupted as
soon ...
Displaying service messages
•► Switch on the ignition.
•► Press on the steering wheel
to select the Serv. menu.
•► Press to select the ASSYST
PLUS submenu and press to confirm.
The service due date ap ...