Setting a speed

WARNING
Keep in mind that it may take a brief moment until the vehicle has made the necessary adjustments.

Increase or decrease the set vehicle speed to a value that the prevailing road conditions and legal speed limits permit. Otherwise, sudden and unexpected acceleration or deceleration of the vehicle could cause an accident and/ or serious injury to you and others.

•► Press the cruise control lever up 1 for a higher speed or down 2 for a lower speed.

•► Keep the cruise control lever pressed until the desired speed is reached.

•► Release the cruise control lever.

The new speed is stored.

Cruise control is not deactivated if you depress the accelerator pedal. For example, if you accelerate briefly to overtake, cruise control adjusts the vehicle's speed to the last speed stored after you have finished overtaking.

    See also:

    Tire pressure of at least 180 kPa (1.8 bar/26 psi) is not reached
    If, after five minutes, a pressure of 180 kPa (1.8 bar/26 psi) has not been achieved: – Switch off the tire inflation compressor. – Unscrew the filler hose from the valve of the faulty tire. – ...

    Releasing seat belts
    Press release button 4() and guide belt tongue 2 back towards belt sash guide 1. Make sure that the seat belt is fully rolled up. Otherwise, the seat belt or belt tongue will be trapped ...

    ESP® trailer stabilization
    If your vehicle with trailer (vehicle/trailer combination) begins to lurch, you can only stabilize the vehicle/trailer combination by depressing the brake firmly. In this situation, ESP® assist ...