Important safety notes
Cruise control maintains a constant road speed for you. It brakes automatically in order to avoid exceeding the set speed. On long and steep downhill gradients, especially if the vehicle is laden, you must select shift range 1, 2 or 3 in good time. By doing so, you will make use of the braking effect of the engine, which relieves the load on the brake system and prevents the brakes from overheating and wearing too quickly.
Use cruise control only if road and traffic conditions make it appropriate to maintain a steady speed for a prolonged period. You can set any road speed above 20 mph (30 km/h).
WARNING
The cruise control is a convenience system
designed to assist the driver during vehicle
operation. The driver is and must always
remain responsible for the vehicle's speed
and for safe brake operation.
Only use the cruise control if the road, traffic, and weather conditions make it advisable to travel at a constant speed.
- The use of the cruise control can be
dangerous on winding roads or in heavy
traffic because conditions do not allow safe
driving at a constant speed.
- The use of the cruise control can be
dangerous on slippery roads. Rapid
changes in tire traction can result in wheel
spin and loss of control.
- Deactivate the cruise control when driving
in fog.
The "Resume" function should only be operated if the driver is fully aware of the previously set speed and wishes to resume this particular preset speed.
WARNING
The cruise control brakes automatically so
that the set speed is not exceeded.
See also:
Active Lane Keeping Assist
Important safety notes
Active Lane Keeping Assist monitors the area
in front of your vehicle by means of a camera
at the top of the windshield. Active Lane
Keeping Assist detects lane markings ...
Warning and display messages in the
multifunction display
– Activate ATTENTION ASSIST using the onboard
computer (Y page 232).
Symbol 1 appears in the multifunction
display.
– If necessary, take a break.
– Press or
to confirm the
message.
On l ...
Hazard warning lamps
The hazard warning lamps automatically
switch on if:
- an air bag is deployed.
- the vehicle is slowed down severely from a
speed of over 45 mph(70 km/h) and comes
to a halt.
- To switch on ...