Daytime running lamps
Daytime running lamps in Canada
The daytime running lamps function is required by law in Canada. It cannot therefore be deactivated.
- Turn the light switch to or .
With the engine running: depending on the ambient light, the daytime running lamps or the low-beam headlamps are switched on.
When the low-beam headlamps are switched on, the indicator lamp in the instrument cluster lights up.
When the engine is running and the vehicle is stationary: if you move the selector lever from a drive position to P, the daytime running lamps/low-beam headlamps go out after three minutes.
When the engine is running, the vehicle is stationary and in high ambient light brightness: if you turn the light switch to , the daytime running lamps and the parking lamps are switched on.
If the engine is running and you turn the light switch to , the manual settings take precedence over the daytime running lamps.
Daytime running lamps in the USA
In the USA, the daytime running lamps are deactivated upon delivery from the factory.
- To activate the daytime running
lamps: activate the daytime running lamps
function in the on-board computer.
- Turn the light switch to or
.
With the engine running: depending on the
ambient light, the daytime running lamps or
the low-beam headlamps are switched on.
When the low-beam headlamps are
switched on, the indicator lamp in
the
instrument cluster lights up.
If the engine is running and you turn the light switch to or , the manual settings take precedence over the daytime running lamps.
See also:
Panic alarm
•► To activate: press
button 1 for at
least one second.
An alarm sounds and the exterior lighting
flashes.
•► To deactivate: press
button 1
again.
or
•► Inse ...
Folding the exterior mirrors in or out electrically
This function is only available in vehicles for
Canada.
Make sure that the SmartKey is
in position 1 or 2 in the ignition lock.
Briefly press button 1. Both
exterior mirrors fold in or out ...
Cruise control lever
1 To store the current speed or a higher
speed
2 To store the current speed or a lower
speed
3 To deactivate DISTRONIC
4 To store the current speed or to call up
the last stored speed ...