Using KEYLESS-GO
The KEYLESS-GO key must be outside the vehicle. All the doors must be closed.
- Touch recessed sensor surface 1 on the door handle until the side windows and the panorama roof with power tilt/sliding panel are fully closed.
Make sure you only touch recessed sensor surface 1.
- Make sure that all the side windows and the panorama roof with power tilt/sliding panel are closed.
On vehicles with a panorama roof with power tilt/sliding panel:
- Touch recessed sensor surface 1 on the door handle again until the roller sunblinds of the panorama roof with power tilt/ sliding panel close.
- To interrupt convenience closing: release recessed sensor surface 1 on the door handle.
See also:
Receiving vCards via Bluetooth®
You can receive vCards from devices (such as
a PC) which support the transmission of
vCards via Bluetooth®.
This requires the device to be authorized in
COMAND. PCs must be authorized via the
...
Uploading/downloading data
With this function, you can transfer COMAND
data from one system (vehicle) to another
system (vehicle). You can use either a USB
stick or an SD card as temporary storage.
You can only transfer ...
Important safety notes
The rear view camera is an optical parking aid.
It shows the area behind your vehicle in the
COMAND display.
WARNING
Make sure that no persons or animals are in
the maneuvering range. Other ...