General information
The program selector button influences:
• the drive program
• the AIRMATIC or ABC suspension settings
• the engine management
Program selector button
Program selector button on AMG vehicles
In AMG vehicles, drive program E is called drive program C.
For further information on the automatic
drive program.
AMG vehicles: only change from automatic drive program C or S to manual drive program M when the vehicle is stationary.
Press program selector button 1
repeatedly until the letter for the desired
gearshift program appears in the
multifunction display.
When the engine is started, the automatic
transmission always switches to automatic
drive program E (drive program C in AMG
vehicles).
See also:
Tire characteristics
Tire data is vehicle-specific and may
deviate from the data in the example.
This information describes the tire cord and
the number of layers in sidewall 1 and under
the tread 2. ...
Storing the current speed or calling up
the last stored speed
WARNING
The set speed stored in memory should only
be set again if prevailing road conditions and
legal speed limits permit. Possible
acceleration or deceleration differences
arising from ...
Multifunction display
Values and settings as well as display
messages are shown in the multifunction
display.
1 Time
2 Outside temperature or speed
3 Description field
4 Menu bar
5 Transmission position
For fur ...