Starting procedure with the SmartKey
To start the engine using the SmartKey instead of KEYLESS-GO, pull the Start/Stop button out of the ignition lock.
To start a gasoline engine: turn the SmartKey to position 3 in the ignition lock and release it as soon as the engine is running.
To start a diesel engine: turn the SmartKey to position 2 in the ignition lock.
The preglow indicator lamp in the instrument cluster lights up.
When the preglow indicator lamp goes out, turn the SmartKey to position 3 and release it as soon as the engine is running.
You can start the engine without preglow if the engine is warm.
See also:
Cleaning the rear view camera
► Use clear water and a soft cloth to
clean
camera lens 1.
Do not clean the camera lens and the area
around the rear view camera with a power
washer. ...
Storing and maintaining the current speed
You can store the current speed if you are driving faster than 20 mph (30 km/h).
Accelerate the vehicle to the desired speed.
Briefly press the cruise control lever up 1 or down 2.
Remove your ...
Removing a wheel
– Unscrew the uppermost wheel bolt
completely.
– Screw alignment bolt 1 into the thread
instead of the wheel bolt.
– Unscrew the remaining wheel bolts fully.
Do not place wheel bolts in ...