Xenon bulbs

If your vehicle is equipped with Xenon bulbs, you can recognize this by the following: the cone of light from the Xenon bulbs moves from the top to the bottom and back again when you start the engine. For this to be observed, the lights must be switched on before starting the engine.

DANGER
Xenon bulbs carry a high voltage. You could get an electric shock and be seriously or even fatally injured if you touch the electric contacts on Xenon bulbs. Therefore, never remove the cover from Xenon bulbs.
Do not change Xenon bulbs yourself, but have them replaced at a qualified specialist workshop which has the necessary specialist knowledge and tools to carry out the work required.
Mercedes-Benz recommends that you use an authorized Mercedes-Benz Center for this purpose. In particular, work relevant to safety or on safety-related systems must be carried out at a qualified specialist workshop.

Bulbs and lamps are an important aspect of vehicle safety. You must therefore make sure that these function correctly at all times.

Have the headlamp setting checked regularly.

    See also:

    Activating/deactivating PRE-SAFE® Brake
    PRE-SAFE® Brake is only available in vehicles with DISTRONIC PLUS. Press the or button on the steering wheel to select the DriveAssist menu. Press or to select PRE-SAFE Brake. Pres ...

    Important safety notes
    You can limit the opening angle of the tailgate. This is possible in the top half of its opening range, up to approximately 4 in (10 cm) before the stop. Make sure there is sufficient cleara ...

    General notes
    When you lock the vehicle, you can simultaneously: close the side windows close the panorama roof with power tilt/ sliding panel On vehicles with a panorama roof with power tilt/sliding panel ...