Switching the automatic locking feature on/off
You can use this function to activate or deactivate the automatic central locking feature. If the automatic locking feature is activated, your vehicle will lock centrally from a speed of approximately 15 km/h.
You will find further information about the automatic locking feature in the "Automatic locking feature" section.
To switch the automatic locking feature on/off: select Vehicle in the main function bar by sliding and turning the COMAND controller and press to confirm.
The main area is active.
Select the Automatic Locking function by sliding or turning the COMAND controller and press to confirm.
See also:
Emergency Tensioning Devices, belt force limiters
The front seat belts and the outer seat belts in the rear are equipped with ETDs
and seat belt force limiters.
The ETDs tighten the seat belts in an accident, pulling them close against the
body. ...
General notes
If you cannot lock or unlock the vehicle with the SmartKey, either the battery
in the SmartKey is discharged, the SmartKey is faulty or the starter battery is
discharged.
Check the battery in ...
Fuel filler flap emergency release
WARNING
Avoid contact with the vehicle walls as they
may contain sharp edges. Otherwise, you
could injure yourself while releasing the fuel
filler flap.
The emergency release is locat ...