Inserting/ejecting CDs/DVDs
DVD changer
The DVD changer has a fixed magazine with six trays.
Magazine tray status 3:
• Indicator lamp off: magazine tray is empty.
• Indicator lamp constantly lit: magazine tray is loaded.
To load a single magazine tray: press respective button 3.
Remove any CD/DVD which may be in slot 1.
Wait until the indicator lamp for button 3 which has been pressed flashes quickly.
Insert the CD/DVD to be loaded into slot 1.
If the CD/DVD has been inserted properly and it is a permissible type, the last CD/DVD loaded will be played.
To load all six magazine trays: press button 2.
The DVD changer checks the load status of all magazine trays and switches to the first empty tray.
Wait until the indicator lamp for the respective button flashes quickly.
Insert a disc into slot 1.
The DVD changer switches to the next empty magazine tray.
Repeat the last two steps until all trays are loaded.
If the CD/DVD has been inserted properly and it is a permissible type, the last CD/DVD loaded will be played.
If you remove one disc while playing another disc, the DVD changer interrupts playback. Playback continues once the disc has been removed.
To remove a disc: press respective button 3.
Remove the CD/DVD from slot 1.
If the CD/DVD is not removed from slot 1, it will be automatically drawn in again after a short while.
To remove all discs: press button 4.
The DVD changer ejects the CD/DVD from the tray currently in use.
Remove the CD/DVD from slot 1.
The DVD changer switches to the next loaded magazine tray and ejects the CD/DVD.
Repeat the last step until the magazine is empty.
See also:
Important safety notes
WARNING
Grains of sand, particles of dirt and other
abrasive materials can enter the brake
system. This can lead to excessive wear and
unpredictable braking efficiency.
After the brakes have ...
Instruction labels for tires and load
WARNING
Do not overload the tires by exceeding the
specified load limit as indicated on the Tire
and Loading Information placard on the
driver's door B-pillar. Overloading the tires
can o ...
Detaching and storing the cargo net
► Detach guide rod ; from bracket
1.
► Press the red button on the upper and
lower
guide rods.
► Fold the cargo net and roll it up.
► Close the two Velcro fastene ...